Auto Shut-Off Function; Anti-Drip System; Self-Cleaning - Singer SteamLogic Manuel D'instructions

AUTO SHUT-OFF FUNCTION

To reactivate the iron, simply move it or turn the Temperature Control Dial to the right. The
and the iron will begin heating up. It may take up to 60 seconds for the iron to be ready for use.
IMPORTANT: ALWAYS disconnect your iron from the electrical outlet after use. NEVER
leave the iron unattended with Auto Shut- Off in operation.
DRAIN THE WATER TANK
2. Unplug Power Cord from the electrical outlet.
3. Open the Water Tank Door and drain the Water Tank.
4. Gently shake iron to remove any remaining water from the Tank.
5. Clo
se the Water Tank Door.
BUILT-IN ANTI-SCALE SYSTEM
occurs during steam ironing. This will prolong the working life of your iron.
NOTE: The anti-scale cartridge will not completely stop the natural process of lime scale
build-up.

SELF-CLEANING

Chamber. The iron will remain in optimal condition if this function is performed at least
1. Unplug the Power Cord from electrical outlet.
3. Fill the Water Tank as described in this manual.
4. Plug in the Power Cord to electrical outlet.
8 – ENGLISH
Using Your SteamLogic Steam Iron

ANTI-DRIP SYSTEM

The anti-drip system is designed to automatically pre-
vent water from escaping through the soleplate when
heard from the anti-drip system, particularly during heat-
up or while cooling down. This is normal and indicates
that the system is functioning correctly.