Change The Interchangeable Panel - Pioneer X-SMC00 Mode D'emploi

Part names and functions

Change the interchangeable panel

(X-SMC00-W and X-SMC00BT-W do not have an interchangeable
panel in the box)
CAUTION
• Exchange of the changeable panel should be performed
on a stable surface.
• Do not exchange the changeable panel while the unit is
hanging from a wall.
• Be careful not to scratch or damage the display panel
when exchanging the changeable panel.
• Do not apply excessive force to the changeable panel.
• If the panel is not attached correctly there is a chance
that opening and closing operations will not be
performed correctly. Because incorrect attachment can
also be the cause of irregular or unwanted noise, make
sure the panel is attached in the correct position.
• Be sure to turn off the power and unplug the power cord
from the power outlet whenever making or changing
connections.
1 Make sure the electric slide CD door is
closed.
2 Using both hands, slide the changeable
panel up to remove it.
3 Align the line below the arrow and the
bottom of the changeable panel, then slide
downward using both hands until you hear a
clicking sound.
02
Arrows
11
En