Service (Cleaning And Maintenance); Weekly Service; Monthly Service - Amann Girrbach ceramill motion DRS Mode D'emploi

S E R V I C E ( C L E A N I N G A N D M A I N T E N A N C E )
8 Service (Cleaning and
Maintenance)
E N
The cleaning of the milling machine
includes the interior, the collet and the
tank.
▷ Carry out service as instructed by the
A wizard on the screen of the milling machine
guides you through the necessary service steps.
NOTE:
Possible damage to the milling machine!
Improper cleaning agents can damage the mill-
ing machine.
▷ Do not use compressed air, ultrasound or a
steam jet for the cleaning (except for clean-
ing of the collet).
▷ Clean the milling chamber with water only.
Do not use cleaning agents.
▷ Clean and dry the milling chamber prior to
downtimes lasting several hours.
40
milling machine (weekly/monthly).
8.1

Weekly service

The weekly service consists of the following steps:
_ Cleaning the interior, removing debris from the
nozzles
_ Cleaning the collet/Spindle maintenance
_ Cleaning the tank and replacing coolant/lubri-
cant (C/L)
8.2

Monthly service

The monthly service consists of the following
steps:
_ Cleaning the interior, removing debris from the
nozzles
_ Cleaning the collet/Spindle maintenance
_ Cleaning the tank and replacing coolant/lubri-
cant (C/L)
_ Machine calibration