Changing The Blank Holder; Transfer Of Milling And Grinding; Jobs - Amann Girrbach ceramill motion DRS Mode D'emploi

O P E R A T I O N D U R I N G P R O D U C T I O N
7.3

Changing the blank holder

In delivery condition, the milling machine is
E N
equipped with one blank holder. For processing
varying materials, it may be required to use a dif-
ferent blank holder.
To change the blank holder:
▷ In the start screen, press button
▷ In the Service menu, press button
blank holder
screen.
NOTE:
Inaccurate working results or damage to the
blank holder possible!
▷ Tighten fastening screw only with the supplied
torque wrench.
38
Machine
and follow the instructions on the
7.4

Transfer of milling and grinding

jobs

▷ Transferring jobs from the CAD software to the
machine.
.
Change
If the wrong job is selected, it can be
deleted using the button
▷ When the job is successfully transferred: Press
Setup button
All necessary components are checked for via
the screen, e.g.:
▪ Is the correct blank holder inserted?
▪ Are the necessary tools available?
▪ Is the correct block inserted?
▪ Is the correct coolant tank inserted?
.
.