Warranty; Support; Machine Description - Rivacold FS Série Mode D'emploi Et D'entretien

Indicates the need to use suitable safety footwear to conduct the operation described.
Indicates the need to use suitable protective goggles to conduct the operation described.

1.5. Warranty

1.5.1. General Conditions
The manufacturer, R
IVACOLD SRL
being free of material and manufacturing defects for a period agreed and stipulated in the sales contract of the
1.5.2. Parts excluded from warranty
The warranty excludes pieces that wear and all consumable tools and materials possibly supplied by the manufacturer with the
.
MACHINE
1.5.3. Responsibility of the User
The client is responsible for:
electrical system set-up;
consumable tools and materials.
1.5.4. Operations causing warranty invalidity
Any attempt to dismantle, modify or tamper with a
becoming invalid and removes the manufactured from any responsibility regarding possible damage to persons or property deriving
from such tampering.
The manufacturer is also removed from possible responsibility and the warranty is invalid for the
unplanned use of the
Data);
use contrary to requisites in norms in force in the country of use;
installing the
MACHINE
connections non-conforming to specifications reported in Chapter 4 – Transport and Installation;
use of work equipment other than those specified in Chapter 5 – Machine Use and in Chapter 6 – Maintenance and Demolition;
total or partial non-compliance with the instructions reported in this handbook;
no or incorrect maintenance;
use of non-original parts or those not specified by the manufacturer.

1.6. Support

Regarding maximum use of the performance provided by the
does not replace the experience of the installers, users or maintenance staff that is trained and qualified.
On the subject, the Technical Support Service of R
telephone support on the features and simplest interventions to conduct on the
sending of documentation material;
ATTENTION:
1.6.1. Intervention Support Requests
To contact the Technical Support Service contact the:
Technical Office of Rivacold s.r.l.
Via Sicilia, 7
Fraz. Montecchio 61022 VALLEFOGLIA (PU)
ITALIA
Telephone: (+39) 0721 919911
Fax: (+39) 0721 490015
E mail ufficiotecnico@rivacold.com
During the requests for support, specify the name, model and registration of the machine.
2 . M a c h i n e
2 . M a c h i n e
The machine is a refrigeration assembly comprised of a condensing unit (external cell), an evaporating unit (internal cell) and an
electrical panel located inside the condensing unit. The refrigerant follows the compression refrigerator cycle mode. The machine can
be equipped with an electrical heater defrost (type MBP and LBP) or a fan defrost (type HBP) controlled by an electronic control unit.
Defrosting is done automatically with a frequency that can be modified by the user; it can also be activated manually using the
controls.
, guarantees the B
LOCKSYSTEM SERIES
(see Paragraph 3.6 – Proper and improper use of the machine Chapter 3 – Safety and Technical
MACHINE
in conditions other than those specified in Chapter 4 – Transport and Installation;
IVACOLD SRL
in case of doubt on the correct interpretation of instructions in this Use and Maintenance Handbook,
contact the Technical Support Service (as indicated below) to obtain the
d e s c r i p t i o n
d e s c r i p t i o n
FS and its equipment manufactured by the same manufacturer as
component by the user or by unauthorised staff leads to the warranty
MACHINE
and the extraordinary maintenance operations, this handbook
MACHINE
provides:
in the following cases:
MACHINE
;
MACHINE
NECESSARY
UK
.
MACHINE
clarifications.
FS Pag. 38 Rev 00 02/12