Promise Technology VTRAK M610p Guide De Démarrage Rapide page 11

Step 5: Making Serial Cable Connections
The RS-232 Serial connection enables the Command Line Interface (CLI) and
Command Line Utility (CLU) on your PC to monitor and control VTrak.
Figure 7. Serial connector for VTrak M610p
To set up a serial cable connection:
1. Attach a null-modem cable to the DB9 connector on the VTrak.
2. Attach the other end of the null-modem cable to a serial port on the Host PC
or Server.
You will establish a serial connection on the Host PC or Server in Step 7 (see
page 13). At this time, continue with Step 6.
Step 5: Making Serial Cable Connections
DB-9 Serial
Connector
CONSOLE
CONSOLE Mgmt
11
Mgmt