Hach MSM 1.5 Manuel D'utilisation De Base page 18

1. Select the profibus card from the controller details page.
2. Push MENU to access the device settings. The device is locked. Refer to
devices on page 15
3. Push Telegram.
4. Push Add Sensor and select a sensor from the list. Push OK to confirm.
The selected sensor shows.
5. Select the sensor and push
6. Push Add Tag and select a tag from the list. Push OK to confirm.
The selected tag shows.
7. Push Save.
Change the sensor order
To change the position of the sensors in the list, do the steps that follow:
1. Select Menu>Telegram to show the list of the sensors.
2. Select the sensor from the list.
3. Use and to move the sensor up or down in the list.
4. Push Save.
Delete a sensor
1. Select Menu>Telegram to show the list of the sensors.
2. Select the sensor and push
3. Push Delete Sensor to delete the sensor and the tags of the sensor from the telegram.
4. Push Save.
Note: The list of the remaining sensors is not changed when a sensor is deleted.
Change the position and delete tags of a sensor
1. Select Menu>Telegram to show the list of the sensors.
2. Select the sensor and push
A list of tags shows.
3. Select a tag from the list.
• Use and to move the tag up or down in the list.
• Push Delete Tag to delete a tag.
4. Push Save.
Add a photometer
1. Set the photometer to ON.
2. Connect the photometer to the HACH Server. Refer to the photometer user manual.
3. Push Devices to start the MSM application.
4. Push ADD DEVICE to add the photometer.
5. Enter the serial number of the photometer. Push Continue to confirm.
6. Wait 30 seconds, then refresh the browser. The photometer will be Online on the device list.
Refer to User interface and navigation—Mobile device/PC
7. Make sure that the correct serial number and image of the photometer are shown.
18 English
.
.
.
Control function for
on page 13.