Hach MSM 1.5 Manuel D'utilisation De Base page 13

Configure the modem
Note: An internet connection is not necessary to complete this configuration.
1. Open the web browser on the PC. Enter the IP address that follows to connect to the SC4200c
Controller.
"http://192.168.100.100"
2. Select the menu Modem.
3. Select the SIM provider from the Provider list. Only if the provider is not in the list, select Other
and enter the settings that follow.
Option
APN
User name
Password
SIM-PIN
4. Push Apply and wait until the message "Modem is currently configured" shows on the PC.
Note: An internet connection is not necessary to complete this configuration.
5. Remove the Ethernet cable and the USB Ethernet adapter from the PC and the controller.
6. After a maximum of 5 minutes, examine the signal strength that shows on the front of the
controller. The cloud icon stays blue to show a correct connection.
7. Change the settings to the initial values when the configuration is completed.
User interface and navigation—Mobile device/PC
After a successful login, the start page My dashboard shows. Push Devices to start the MSM
application. Refer to Table
Sign Display
My dashboard Opens the start page.
Devices
Data
Manage
User profile
Logout
Description
Provider name (Access Point Name)
User name
User password
SIM card PIN
5. Push to open the main menu. Refer to
Table 4 Main menu
Description
Shows the device list for INSTRUMENT MANAGEMENT.
Optional: Shows the DATA MANAGEMENT COLLECT, GRAPHS and
SPREADSHEETS.
Adds new users and roles. Refer to
Optional for DATA MANAGEMENT: PLANT SETUP
Shows the name and email from the actual user.
Exits the MSM application.
Table
Add a new user on page 15.
4.
Admin Basic
X X
X X
X X
X
X X
X X
English 13