Using The Touchscreen - Bosch PLR 50 C Notice Originale

Take the batteries out of the measuring tool when you are not using it for a pro-
u
longed period of time. The batteries can corrode and self-discharge during pro-
longed storage.
Operation

Using the touchscreen

Do not use the measuring tool if the touchscreen is visibly damaged (e.g. cracks
u
in the surface etc.).
The display is divided into the status bar (A), touchscreen (B) and
A
menu bar (C) sections.
The status bar shows the Bluetooth® connection status, the temper-
ature warning and the state of charge of the batteries/rechargeable
B
batteries.
The measuring tool can be controlled by touching the buttons on the
C
touchscreen.
The menu bar provides additional functions (e.g. Bluetooth® on/off, menu, delete).
– Use only your fingers to operate the touchscreen.
– Lightly tap the corresponding button. Do not apply high pressure or use sharp objects
to tap the touchscreen.
– Do not bring the touchscreen into contact with other electrical devices or water.
– To clean the touchscreen, switch the measuring tool off and wipe off dirt using, for ex-
ample, a microfibre cloth.
Start-Up
Never leave the measuring tool unattended when switched on, and ensure the
u
measuring tool is switched off after use. Others may be dazzled by the laser beam.
Protect the measuring tool from moisture and direct sunlight.
u
Do not expose the measuring tool to any extreme temperatures or variations in
u
temperature. For example, do not leave it in a car for extended periods of time. In
case of large variations in temperature, allow the measuring tool to adjust to the ambi-
ent temperature before putting it into operation. The precision of the measuring tool
may be compromised if exposed to extreme temperatures or variations in temperat-
ure.
Avoid hard knocks to the measuring tool or dropping it. Always carry out an accur-
u
acy check before continuing work if the measuring tool has been subjected to severe
Bosch Power Tools
English | 31
1 609 92A 4P1 | (17.01.2019)