Set Sleep Timer; Set The Alarm Timer - Krüger & Matz KM1598D Mode D'emploi

SET SLEEP TIMER

This unit can switch to standby mode automatically after a set period.
When the unit is turned on, press SLEEP button repeatedly to select a preset
period (in minutes):
120 > 90 > 60 > 45 > 30 > 15
When sleep timer is activated, the "SLEEP" is displayed.
To deactivate the sleep timer, press SLEEP button repeatedly until [SLEEP
OFF] is displayed.

SET THE ALARM TIMER

This unit can be used as an alarm clock. You can select DISC, USB or TUNER
as alarm source.
1. In standby mode, press and hold the TIMER button until [TIMER SET] (set
timer) scrolls on the display and the source is displayed, e.g. DISC.
2. Press VOL+/VOL- button on the remote control to select source.
3. Press TIMER button, the hour indicator will blink.
4. Set the hour with the VOL+/VOL- buttons on the remote control.
5. Press TIMER button, the minute indicator will blink.
6. Repeat above steps 4-5 to set the minute.
7. Repeat above steps 4-5 to set the alarm volume.
Activate / deactivate alarm timer
In the standby mode, press TIMER button repeatedly.
• If timer is activated, the
• If timer is deactivated, the
Note:
• To exit timer setting mode without storing, press the STOP
• If no button is pressed in 90 seconds, the unit exits clock setting mode automatically.
• If DISC/USB source is selected and the audio cannot be played, TUNER is
activated automatically.
40
icon is displayed.
icon disappears.
Owner's manual
button.