Connecting Auxiliary Equipment - Krüger & Matz KM1598D Mode D'emploi

Connecting the Speakers
Connect the speaker cords between the terminals as shown below.
Connect the cable with a sliver head to the (-) terminals and cable with a gold
head to the (+) terminals.
How to connect:
1. Turn the terminal cap counterclockwise to loosen it. The speaker terminal
caps cannot be fully removed from the base.
2. Insert the wire into the terminal fully.
3. Turn the terminal cap clockwise to securely connect it.

Connecting Auxiliary Equipment

Connect the AUX IN sockets on the rear of the unit to the AUX output sockets
on the auxiliary equipment with an audio cable illustrated below.
• Rotate the SOURCE knob on the unit or press the AUX button on the remote
control to select the AUX source.
• Start play on the audio player.
30
Owner's manual