Parts Description; Technical Data; Safety; Safety Instructions - LIVARNO LUX 3000.063.010 Instructions De Montage, D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Parts Description

Aluminium baffle
1
Connecting plug (lower gooseneck lamp unit)
2 a
Internal power cord
2 b
Lamp base with lower gooseneck lamp unit
3
Assembly bracket (for lower gooseneck lamp
4
unit)
4 Cross-tip screws
5
ON / OFF switch (incl. dimmer function)
6
Upper gooseneck lamp unit
7
Connecting plug (upper gooseneck lamp unit)
8
2 Socket head screws
9
Power cord with connecting plug
10
LED driver
11

Technical Data

Model no.:
3000.063.010
Power input:
max. 23 Watt (LED module
not replaceable)
Switching cycles:
> 15,000
Life:
25,000 h
Total height:
approx. 165 cm
Protection class:
II /
LED driver:
Model:
EDP024V0240PS
Input voltage:
220–240 V∼, 50 / 60 Hz
Output voltage:
24 V
Output current:
1000 mA
Protection class:
II /

Safety

Safety instructions

Damage due to failure to comply with these instruc-
tions for use will invalidate the warranty! We assume
no liability for consequential damages! We assume
no liability for property damage or personal injury
due to improper handling or failure to comply with
the safety instructions!
Introduction / Safety
LIFE AND RISK OF ACCIDENT
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
poses a suffocation hazard. Children frequently
underestimate the dangers. Please keep the
product out of the reach of children at all times.
This product is not a toy.
This device may be used by children aged 8
years and up, as well as by persons with reduced
physical, sensory or mental capacities, or lack-
ing experience and / or knowledge, so long as
they are supervised or instructed in the safe use
of the device and understand the associated
risks. Do not allow children to play with the de-
vice. Cleaning and user maintenance should not
be performed by children without supervision.
Avoid the risk of fatal injury
from electric shock
Check the lamp for possible damage before
every use. Never use the light if it shows any
signs of damage.
CAUTION! A damaged light means danger
of death from electric shock. In the event of dam-
age, repairs or other problems with the light
please contact the service centre or a qualified
electrician.
To avoid hazards, if the external flexible lead
on this lamp is damaged it must be replaced by
the manufacturer, their service representative or
an equivalent professional!
Before use, verify the available mains voltage
matches the required operating voltage of the
light (220–240 V∼, 50 / 60 Hz).
Ensure that the light does not come into contact
with water or other liquids under any circum-
stances. Always unplug the LED-Driver prior to
assembly, disassembly, cleaning, or if the light
will not be used for extended periods.
Never open any of the components of the elec-
trical equipment or insert any objects into the
same components. This will pose a risk of fatal
injury from electric shock.
DANGER TO
GB
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lampadaire led

Table des Matières