Controller To Pump Connection - Varian PTB Turbo V 700 HT 969 9445 Notice D'emploi

17 Technical Information
Interconnections

Controller to Pump Connection

A five-meter long cable is to connect the controller to the pump. The
following figures show the controller output connector configuration
where pins:
Figure 13
250/304
A-F = upper bearing temperature sensor
B-C-D = 56 Vac 3-phase output to pump motor stator
E = ground
Controller-to-pump connector (applicable to model 969-9445 and
969-9545)
Turbo-V 700HT Controller User Manual / 87-900-877-01 (F)