Sony SU-WL500 Manuel D'installation page 17

D: Portrait, +20° leaning
Note
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
WARNING
Be sure to tighten the securing screw firmly.
If you fail to do so, the TV may fall when it is
pushed upward and cause injury.
Confirming the
completion of the
installation
Follow the instructions in the SU-WL500 instruction
manual to confirm.
When removing the TV
Follow the instructions in the SU-WL500 instruction
manual to remove.
Screw
(+BVST4 × 12)
17
(GB)