Sony SU-WL500 Manuel D'installation page 12

2
Install the TV onto the Base
Bracket.
 Referring to the Screw and Hook locations
diagram/table on page 20, determine the
holes of the Base Bracket for latching the
upper hooks of the Mounting Hook.
 Hold the TV securely with both hands, and
gently align it on the wall.
WARNING
• Be sure that two or more persons hold the TV when
carrying it.
• When carrying the TV, hold it in landscape
orientation, and take care not to drop it when
installing. Do not apply excessive force to the TV;
otherwise, it may be deformed.
Mounting Hook
12
(GB)
3
Confirming the
completion of the
installation
Follow the instructions in the SU-WL500 instruction
manual to confirm.
Base Bracket
When removing the TV
Follow the instructions in the SU-WL500 instruction
manual to remove.
Firmly secure the TV and the
Base Bracket using the screw
supplied with SU-WL500
(+BVST4 × 12).
Screw
(+BVST4 × 12)
Note
When using an electric screwdriver, set the torque
setting to approximately 1.5 N·m {15 kgf·cm}.
WARNING
Be sure to tighten the securing screw firmly.
If you fail to do so, the TV may fall when it is
pushed upward and cause injury.