Emptying The Dust Container; Accessories; Environment - Festool CTH 26 E/a Notice D'utilisation D'origine

English
► Close and dispose of the safety bag in ac­
cordance with statutory regulations.
► Clean any dust deposits from the area be­
hind the main filter.
► Insert a new main filter in the frame.
► Insert the retainer [9-2]with the main filter
and fold over the lever [9-4] until it engages
in position.
► Tighten the safety screws[9-3].
► Replace the top section [2-1] and close the
locking clips [2-2].
9.2

Emptying the dust container

The dust container [2-3] can be emptied once
the top section has been removed.
► After extracting fluids, clean the fill level
sensors [10-1] regularly with a soft cloth
and inspect for damage.

10 Accessories

The order numbers for the accessories and fil­
ters can be found in the Festool catalogue or on
the Internet at "www.festool.com".
10.1 Modules
The following modules for upgrading the mobile
dust extractor are available in the accessories
programme. Modules must be fitted to the
module slot [1-3] by an authorised service
workshop:
– Compressed air module,
– Socket module with permanent power sup­
ply,
– Socket module with automatic switch-on
unit (not suitable for GB 110 V version),
– Energy box module (EAA) for using the au­
tomatic switch-on unit on the EAA.
You can find more detailed information on the
modules at "www.festool.com".

11 Environment

Do not dispose of the device in the
household waste! Recycle devices, ac­
cessories and packaging. Observe appli­
cable national regulations.
EU only: In accordance with the European Di­
rective on waste electrical and electronic
equipment and implementation in national law,
used power tools must be collected separately
and handed in for environmentally friendly re­
cycling.
Information on REACH: www.festool.com/reach
22