Emptying The Dust Container; Service And Maintenance; Accessories - Festool CLEANTEX CT 26 E Guide D'utilisation

CAUTION
Hazardous dust
Damage to the respiratory passage
Wipe down the mobile dust extractor and clean
all accessories thoroughly using the extractor
(inside and out) before removing from the work-
ing area.
Parts that you were not able to clean thoroughly
must be sealed in an airtight plastic bag prior to
transportation.
Wear a dust mask!
Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.

Emptying the dust container

The dust container [2-3] can be emptied once the
top section has been removed.
WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an
unauthorised person can lead to the wrong con-
nection of the power leads or other components,
which in turn can lead to accidents with serious
consequences.
Use only original Festool accessories and Festool
consumable material intended for this machine be-
cause these components are designed specifically
After extracting fluids, clean the fill level sen-
sors [8-1] regularly with a soft cloth and inspect
for damage.
8

Service and maintenance

To prevent accidents, always remove the plug
from the power supply socket before carrying out
any maintenance or repair work on the tool!
Do not use compressed air to clean the electrical
tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
A dust test must be performed at least once a year
by the manufacturer or an instructed person. This
test may include checks to determine whether the
filter is damaged, the machine is sealed properly
and the monitoring features are functioning cor-
rectly.
During maintenance and repair work, all compo-
nents that cannot be cleaned satisfactorily must be
replaced. The old components must be sealed in
impermeable plastic bags prior to disposal in com-
pliance with applicable regulations for this type of
waste.

Accessories

for the machine. Using accessories and consum-
able material from other suppliers will most likely
affect the quality of your working results and limit
8-1
WARNING
8-1
13