Additional Functions - Teuco HYDROTOP Manuel De L'utilisateur

EN
ADDITIONAL FUNCTIONS
Having switched on by pressing the "O/I" button, the user can activate certain additional functions (available
only on certain versions: see under DETAILS OF THE REMOTE CONTROL).
CROMOExPERIENCE
Whenever a function is activated, or the system
is ready (Display showing READY) the user can
switch on the cromoexperience.
Switch on the Cromoexperience function using the
"light" button. The Cromoexperience function will
start, rotating colours at approximately 10-second
intervals. The colours are: white, pink, red, orange,
yellow, green, cyan, blue and purple. The display
will indicate the on status for a few seconds before
returning to the previous item.
PRESS the "light" button to block the required
colour. Press the "light" button twice in rapid
succession.
Turn off the cromoexperience by pressing the
"LIGHT" button. The cromoexperience turns off and
the monitor shows for a few seconds the effective
shutdown then returns to the previous display.
CROMOExPERIENCE DOESN'T TURN ON!!!
If the message "ADD WATER" is displayed, fill the tub
to the level at which the underwater light comes on.
16
15 36 C 20:30
o
LIGHT oN
Display indicating LIGHT ON
15 36 C 20:30
o
LIGHT oFF
Display indicating LIGHT OFF
ADD
WATER
Display in DIAGNOSTICS mode
HYDROTOP - Hydrosilence