Restoring Default Settings; Bluetooth Function - Teac NR-7CD Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Troubleshooting (continued)

Playback is not possible.

e If the disc is upside down, reload it with the labeled side up.

e If the disc is dirty, wipe it clean.

e If a blank disc is loaded, replace it with a disc that has record-

ings on it.

e Depending on the quality of the CD-R/CD-RW disc and

recording conditions, proper playback might not be possible.

e This unit cannot play back unfinalized CD-R/CD-RW discs.

The sound skips.

e Vibrations will cause the sound to skip. Install this unit in a

stable location.

e If the disc is dirty, wipe it clean.

e Do not use discs that are scratched or cracked.

Bluetooth function

Cannot show device name.

e This unit does not support the display of symbols or double-

byte characters, including Japanese and Chinese. Use only

single-byte English letters and numbers for the names of

Bluetooth devices connected to this unit.

Cannot change connected Bluetooth device.

e This unit cannot have Bluetooth connections to multiple

Bluetooth devices at the same time.

To change the device connected with this unit by Bluetooth,

end the connection with the currently connected Bluetooth

device before connecting to another Bluetooth device.

Since this unit uses a microcontroller, external noise and other inter-

ference can cause the unit to malfunction. If this occurs, unplug the

power cord, wait for a while, and then turn the unit on again and

restart operations.