Teac NR-7CD Mode D'emploi page 11

A
SPEAKER terminals
Use commercially-available speaker cables to connect the ¥
terminal of the unit to the ¥ terminal of the speaker and the ^
terminal of the unit to the ^ terminal of the speaker (page 9).
B
Analog audio input (LINE IN) connectors
Use these to input 2-channel analog audio signals. Connect an
analog audio output device to these RCA connectors.
Use commercially-available cables for connections.
Connect this unit's R input connector to the R output connec-
tor of the audio output device, and this unit's L input connector
to the L output connector of the other device.
RCA audio cables
L
R
C
Digital audio input connectors
COAXIAL
Use this to input digital audio. Connect the coaxial digital audio
output connector of a digital audio device to it.
Use a commercially-available RCA coaxial digital cable
for connection.
OPTICAL
Use these to input digital audio. Connect optical digital audio
output connectors of digital audio devices to them.
Use commercially-available optical digital cables with
rectangular connectors for connection.
D
Power inlet (~IN)
Connect the supplied power cord here.
After all other connections are complete, connect the power
cord's plug to a wall outlet.
V Do not use any power cord other than the one
included with this unit. Use of other power cords
could result in fire or electric shock. Unplug the
cord from the outlet when not using the unit for a
long time.
E
ETHERNET port
Connect a commercially-available LAN cable to this port when
you want to connect this unit to a wired network or the Internet.
o When switching input sources, this port is labeled "NET".
F
USB port
Connect USB flash drives that contain audio files here.
o USB flash drive playback requires operation using a device
(with the dedicated app) that is on the same network as this
unit.
V
Complete all other connections before turn-
ing the unit on.
L
o Carefully read the manuals of the devices that you are
R
connecting and follow their instructions when making
connections.
o Do not bundle connecting cables with power cords. Doing
so could cause noise.
o Connect all plugs completely.
EN
11