Listening To Cds - Teac NR-7CD Mode D'emploi

1
Turn the SOURCE knob to select CD.
o You can also use the remote control CD button.
2
Press the tray open/close (-) button.
3
Place a disc on the tray with the labeled side
up.
o Do not put more than one disc onto the tray at a time.
o If the tray is closed while a disc is outside the center guides,
the disc might become stuck inside and the tray might not
open. Be sure to always place discs within the guides at the
center of the tray.
o When the tray is opening or closing, do not force it by hand.
4
Press the tray open/close (-) button to close
it.
V
CAUTION
Be careful not to let your fingers be pinched when the
tray closes.
"TOC READ" will appear on the display and the unit will start to
read the disc.
o The unit takes some time to load the disc.
Wait until the total number of tracks and total playback time
appear on the display.
When reading completes, the display will appear as follows.
Display example
CD
10 56:03
Total number Total playback time
of tracks on (minutes: seconds)
disc
o "NO DISC" appears if no disc has been loaded.
o "DISC!" appears if a disc that cannot be played is loaded.
Continued on the next page
e

Listening to CDs

42
- .0
EN
21