Display Brightness - Teac NR-7CD Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Settings (continued)

PCM digital filter

This sets the type of digital filter used when converting PCM signals

from digital to analog.

*PCM D-FILTER

> OFF

OFF

No digital filter is used.

FIR SHARP

An FIR filter with a steep roll-off is used to sharply cut signals out-

side the audio band.

FIR SLOW

An FIR filter with a slow roll-off is used to gently cut signals out-

side the audio band.

SDLY SHARP

A short delay filter with a steep roll-off is used to sharply cut sig-

nals outside the audio band.

SDLY SLOW

A short delay filter with a slow roll-off is used to gently cut signals

outside the audio band.

Note about the digital filter during PCM playback

FIR-type digital filters

This type of filter has an established reputation for sound quality

and features tonal quality with both dense, rich sound reverbera-

tions and crisp sound transients.

SDLY-type digital filters

This type of filter has no pre-echo in the impulse response and

features natural sound attack and reverberation for a tonal quality

that is close to the original.

DSD digital filter

This sets the type of digital filter used when converting DSD signals

from digital to analog.

*DSD D-FILTER

> CUTOFF 150kHz

CUTOFF 50kHz

50kHz cutoff frequency

CUTOFF 150kHz

150kHz cutoff frequency