QSC CX108V Manuel D'utilisation page 3

INTRODUCTION
Thank you for purchasing this QSC power amplifier. Please read the following directions to obtain the best results.
Key Features
•8 channels at 70V for distributed audio systems.
•The 8 channels are arranged as four stereo pairs. Each pair has its own DataPort and Mode Switch.
•Four QSC DataPorts connect to the most advanced QSC accessories and monitoring systems.
•Mode switches for Clip Limit, Low Frequency Filter, Bridge Mono, and Parallel Inputs.
•QSC switching supply.
•Complete amplifier protection and monitoring.
1- Power Switch
2- Cooling Air Exhaust Vents
3- Power On
4- Ch.1 Gain Control
5- Ch.1 Clip Indicator
6- Ch.1 Signal Presence Indicator
7- Ch.2 Clip Indicator
8- Ch.2 Signal Presence Indicator
9- Ch. 1 & 2 Parallel Mode Indicator
10- Ch.2 Gain Control
UNPACKING
Factory packed carton contains:
•CX108V amplifier
•User's manual
•Security cover for gain controls
• Adhesive rubber feet (for non-rack mount applications)
•Eight 3-pin connectors for input terminals
•Two 8-pin connectors for output terminals
•IEC-type detachable power cord
Use the same type carton when shippng the amplifier.
11- Ch.1 & 2 Bridge Mode Indicator
12- Input Connectors
13- DataPort Connectors
14- Mode Switches
15- Output Connectors
16- Cooling Air Inlet Vents
17- Serial Number Label
18- Output Connection and Mode Switch Diagrams
19- IEC PowerConnector
EN
3