Connecting The Transmitter - Amplicomms TV 2500 Mode D'emploi

G
ETTING STARTED
Getting started
Box contents
• 1 Receiver with rubber ear buds size "L" (large)
• 1 Transmitter base
• 1 AC adapter for the transmitter
• 2 Rechargeable batteries for the receiver (Lithium Polymer)
• 1 Optical TOSLINK Digital Audio cable
• 1 Analogue Audio cable (both ends with 3.5 mm stereo plug)
• 1 Adapter cable (RCA) for analogue audio cable
• 1 Adapter plug 6.3 mm to 3.5 mm for analogue audio cable
• 1 External microphone with holder and adapter plug for analogue audio
cable
• 1 Additional pair of rubber ear buds size "S" (small)
• 1 User guide
Important: please make sure you've read the safety information on page
30 before you set up your device.

Connecting the transmitter

1 Connect the power adapter to the DC IN input socket located on the
transmitter rear panel.
2 Connect the power adapter provided to an electrical outlet.
3 Connect the transmitter to your audio source.
RCA adapter cable, audio cable, 6.3 mm to 3.5 mm adapter plug and an
external microphone are provided for various type of connection to your
audio source (e.g. TV set, Hi-Fi system, MP3 or iPod).
Please note that only one input (either analogue audio input or optical
input/TOSLINK) must be connected.
The green power indicator LED will blink as soon as you have connected the
power adapter to the electrical outlet and when the audio signal is detected
from the audio source, the green LED indicator will glow constantly.
20
Helpline UK 0844 800 6503
(See page 32 for costs and hours of operation)