Amplicomms TV 2500 Mode D'emploi page 31

the microphone opening is not covered!
You can hear your surroundings and you use the receiver as an assistive lis-
tening device which helps you to better hear other people.
To switch the microphone off press the button again. The power on indica-
tor will turn to green and you will hear the sound from the audio source.
Tone clarity
You can set the tone clarity with the key on the transmitter. Press the
depicted key repeatedly. Due to the current setting the indicator LEDs 1, 2,
3 or none of them will glow constantly.
The following table shows the settings. Try out which setting works best for
you.
Setting LED indicator (orange)
Default
(See page 32 for costs and hours of operation)
Effect
Flat
Bass Boost +
Treble Boost
Treble Boost
Bass Boost
Helpline UK 0844 800 6503
O
PERATION
27