Assembly Instructions; Mounting Wall-Mounted Bracket - FLORABEST FSA 25 A1 Traduction Du Manuel D'utilisation Original

GB IE
• Never let go of the hose if
the automatic stop function
is not engaged.
• Never allow the hose to
retract freely. This could
result in damage to the
product.
• Never block the hose end
with your fingers or other
objects during use.
• To avoid frost damage,
remove the hose reel from
the wall and store it dry
during winter.
• Ensure that the ground
near the hose reel is kept
as dry as possible.
• Turn the tap into the off
position when the hose
reel is not in use.
• The hose is not suitable for
delivering drinking water.
• Do not direct the water
jet towards electrical
equipment!
• Do not direct the water
jet towards persons or
animals!
80
Assembly instruction
Warning! The supplied
plastic plugs are suitable
for cement walls (plaster
up to 1cm).For other wall
types, special plugs must
be used.
The installation will use electric
power tools, read the safety
instruction completely before
operation. Have the installation
done by experienced persons
only.
Mounting wall-
C
mounted bracket
1. Mark 4 holes position
on the wall using the
wall mount bracket (1),
drill holes into the wall
50mm depth with an
Ø10mm percussion
drill. 100 - 110 cm
height of lower holes is
recommended.
Note: Higher than
110cm will possible
effect the auto rewind
function.