Notes On Safety; Symbols Used In The Instructions; Symbols Used On The Device - FLORABEST FHE 710 A1 Traduction Du Mode D'emploi D'origine

Perche élagueuse électrique
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

GB
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).

Notes on safety

This section deals with the basic safety
regulations while working with the electric
pruner.
An electric pruner is a dangerous
device, which can cause serious
or even fatal injuries with incorrect
or careless use. Thus, for your own
safety and the safety of others, you
should always take note of the in-
structions on safety and, in case of
difficulties, consult a specialist for
advice.
74
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol (explanation of
precaution instead of exclamation
mark) with information on preven-
tion of harm / damage.
Notice symbol with information on
how to handle the device properly.

Symbols used on the device

Make yourself familiar with all
control elements before any work.
Practice handling the saw and have
explained the functions, operating
methods and sawing techniques by
a practiced user or specialist.
Read and take note of the operat-
ing manual belonging to the ma-
chine!
Do not expose the machine to the
rain. Do not allow the equipment
to become damp or operate it in a
damp environment.
Danger due to materials blown out
of machine!
Keep the equipment away from
nearby people.
Caution! Remove the plug immedi-
ately from the plug socket in case
of damage or cutting through of the
mains
cable.

Publicité

Table des Matières
loading

Table des Matières