Bluetooth Mode - PERFECTPRO DIGITUBE Manuel De L'utilisateur

4. In your mobile phone open the Setting menu and select Bluetooth, then select "PP- DigiTube" in the Bluetooth devices list
(Bluetooth pairing instructions may vary per type of mobile phone, please check your mobile phone manual).
5. When Bluetooth pairing is successful, the Bluetooth connected LED will stop blinking and the LCD display will show "Bluetooth
Connected".
Playing music from your mobile phone
1. Press the On/Off button to switch on the radio.
Select Bluetooth mode by pressing the SOURCE button.
2.
3. Start playing music by using the media players in the paired mobile phone.
4. Playback can be controlled from the mobile phone or by pressing the
SELECT-INFO button for Play/Pause.
Answering an incoming phone call from the DigiTube radio
The Hands-Free-Calling feature allows you to answer an incoming phone call when operating in the Bluetooth, DAB, FM or Aux
mode.
1. Press the PHONE button (Phone icon) on the right to pick up an incoming call.
2. Speak towards the microphone (MIC) located under the PHONE button of the radio.
3. Adjust the conversation volume by pressing the VOLUME – or + buttons. A lower volume setting can reduce a possible echo in
the phone conversation.
4. Press the PHONE button (Phone icon) again to hang up the phone call.
Note: The volume of the Ringtone will be loudest for the first 20 seconds, then it will resume to the previous used level. Pressing the
VOLUME – or + buttons or the PHONE (Phone icon) will also resume the volume to the previous used level.
Redialing your last dialed phone number (of a paired mobile phone)
The Hands-Free-Calling feature allows you redialing your last dialed phone number on your mobile phone (Bluetooth mode only).
1. Press the On/Off button to switch on the radio.
2. Select Bluetooth mode by pressing the SOURCE button.
15
or buttons on the DigiTube radio. Press the
3. Press and hold the PHONE (Phone icon) button on the right for more than 2 seconds. The last dialed phone number on your
mobile phone will be redialed.
4. Adjust the conversation volume by pressing the VOLUME – or + buttons if necessary.
5. Press the PHONE button (Phone icon) again to hang up the phone call.
Bluetooth Options
The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the MENU button to enter into the System setting.
2. Press the TUNING or buttons until "Bluetooth" is displayed; then press the SELECT-INFO button .
3. Press the TUNING or buttons to select "BT always on", "BT mode only" or "Disconnect BT" options, and press the
SELECT-INFO button to select the setting.
a. BT always on Bluetooth is turned on when the DigiTube radio is on. You can playback music in the Bluetooth mode
and use the Hands-Free-Calling feature to answer incoming phone calls in all operation modes, for
example, also when you are listening to the radio. As an indication, the blue Bluetooth connected LED
will be on in all operation modes. (FM, DAB, Bluetooth and AUX IN).
b. BT mode only Bluetooth is turned on only in Bluetooth mode. You can playback music and use the Hands-Free-Calling
feature to answer incoming phone calls in the Bluetooth mode only.
As an indication, the blue Bluetooth connected LED will be on only in the Bluetooth mode.
c. Disconnect BT Bluetooth will be disconnected from your mobile phone and enter the "discoverable mode" (The blue
Bluetooth connected LED will start blinking until a new pairing is established). This is to allow the
Bluetooth pairing to another device. If no new device is paired, the Bluetooth will automatically try to
connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is "Not connected" for a period over 15 minutes,
the unit will automatically switch to standby mode. Pressing the On/Off button will wake up the unit.
GB
G B
16