Safety Instructions; Use Of The Sunshade; Screw Torque Values - Glatz PALAZZO Style E Notice De Montage Et D'utilisation

1. SAFETY INSTRUCTIONS

• Please read and understand these instructions before setting up or
using your sunshade. Please keep this manual for later reference.
• Failure to follow these safety instructions and instructions for
installation and use could result in serious personal injury and
damage to materials, for which the manufacturer assumes no
responsibility.
• The sunshade and accessories must only be installed by appropria-
tely qualified personnel.
• Never lean the sunshade unsecured against a wall. It could slip and
fall.
• Only attach GLATZ accessories intended for that purpose to the
sunshade. Do not hang any other object from the structure.
• The sunshade and accessories must not be used by children, or by
persons with reduced physical or mental capabilities.
• Do not allow children to play with the sunshade or accessories.
• Before opening or closing the sunshade, check that there are no
obstructions in the way.
• Opening and closing of the sunshade must be supervised.
• The sunshade is not designed to hold the weight of snow. It must be
closed in case of snowfall.
• The sunshade and accessories must be checked regularly for
damage. Any defects should be rectified before further use.
• Only use original GLATZ accessories and spare parts to ensure
safety, complete comfort and proper functioning.
• In case of freshening wind or approaching squall,
please close the sunshade.
• Unsupervised sunshades must not remain open.
Unexpected gales could cause serious damage.
• If used in exposed locations, for example near the coast or in regions
with heavy winds, increased wear is to be expected. In these cases,
we recommend more intensive maintenance.

1.1 Use of the Sunshade

The GLATZ giant sunshades are exclusively intended as weather-
resistant sun protection. The wind resistance of the extended sunshade
is limited and the information given concerning this presupposes
anchoring in accordance with instructions. In comparison to ground
anchorage, mobile stands have reduced resistance to the wind.
Operation temperature: − 20 °C to + 50 °C

1.2 Screw Torque Values

M6 M8 M10
6 Nm 16 Nm 32 Nm
M12
56 Nm
|EN
11