Elica SUT950 Guide D'utilisation, D'entretien Et D'installation page 13

FOR SUT950 - SUT951
Turn blower and lights off. Make sure the
lights are cool.
If new lights do not operate, check fuses and be
sure globes and breakers are in­serted
correctly.
Do not remove the entire fixture (socket) as
this is very difficult to reinstall. Gently pry
the bulb from the fixture using a soft
instrument such as a toothpick. Steel
in­struments will scratch the surface (refer to
figure 5).
Replace the appropriate bulb. Check par­ts
brochure or specification sheets on our website.
Wipe both sides of the glass whi­lst it is out.
Re<insert the glass<blocking ring and fasten it.
fig. 5
13