Connecting Your Phone To The Bluetooth; Initial Pairing; Hands-Free System - Toyota SWC Mode D'emploi

Connecting your phone to the Bluetooth

hands-free system

Before you can use this system, you must complete a Bluetooth
your phone. You establish a Bluetooth
When you set up a paired link, the system remembers the phone's ID. Once the car and phone are
paired, the system automatically connects to your phone every time you turn on the ignition.
This system supports paired links with up to 4 phones.
Note: The process of initiating a Bluetooth
manufacturer. For more information, refer to the user's guide for your phone.

Initial pairing

Note: Use this procedure only if there are no handsets paired to the system.
Seated in the car and ignition turned on:
Action
1 Press and hold the mode button.
2 When prompted, say "Pair phone".
The system responds:
for the passcode.
3 When the phone displays the device name 'TOYOTA', select the device.
The phone displays the passcode entry screen.
4 Enter the passcode (1234).
The phone displays "pin verified," and the system says:
progress.
Note: Some phones ask you to accept the Bluetooth
Upon successful completion, the system says:
for use.
10 Using your Bluetooth
®
connection between car and phone with a paired link.
Set your phone in scan mode and enter 1234 when prompted
®
hands-free system
®
®
connection with a phone varies per phone
Pairing complete. Connection in
®
link. Enter yes.
Connection is complete. Phone
connection between your car and
®
ready
<n>