Dialing A Number From The Contact List; Dialing A Number Using The Phone's Voice Tags [Phone Voice Name]; Using The Speed Dial Command (Not Available For All Phones) - Toyota SWC Mode D'emploi

Dialing a number from the contact list

Action
1 Press and hold the mode button.
2 When prompted, say "Call
Note: The contact must be a valid contact stored in the contact list.
The system responds:
3 If the number recited by the system is correct, say "Yes".
The system responds: Calling.
Dialing a number using the phone's voice tags
[Phone voice name]
Action
1 Press and hold the mode button.
2 When prompted, say "Phone voice tag [Phone voice name]".
Note: The voice tag must already be stored in the phone.
The system responds:
3 Say "
<voice tag>
The system calls the number associated with the phone voice tag [phone voice name].
Using the speed dial command
(Not available for all phones)
Action
1 Press and hold the mode button.
2 When prompted, say "Speed dial".
The system responds:
3 Recite the speed dial number.
The system repeats the number it heard and asks:
4 If the number recited is correct, say "Yes".
The system responds: Dialing, and places the call.
Note: Speak speed dial numbers as continuous digits. For example, dictate speed dial location 22
as "2-2", not "twenty-two".
16 Using your Bluetooth
<contact>
Do you want to call <contact> ?
Phone voice tag please, [Phone voice name, please].
" (where
<voice tag>
Speed dial number, please.
®
hands-free system
".
is a voice tag stored in the phone).
Is this correct?