Additional Pairing; Selecting A Phone - Toyota SWC Mode D'emploi

Additional pairing

To pair additional handsets to the system, seated in the car and ignition turned on.
Action
1 Press and hold the mode button.
2 When prompted, say "Setup menu".
The system responds:
3 Say "Pair phone".
The system responds:
for the passcode.
4 When the phone displays the device name 'TOYOTA', select the device.
The phone displays the passcode entry screen.
5 Enter the passcode (1234).
The phone confirms that the pin is verified and says:
progress.
Note: Some phones ask you to accept the Bluetooth
Upon successful completion, the system says:
for use.

Selecting a phone

Action
1 Press and hold the mode button.
2 When prompted, say "Setup menu".
The system responds:
3 Say "Connect phone
The system responds:
Upon successful completion, the system says:
Setup menu. Please say a
Set your phone in scan mode and enter 1234 when prompted
Setup menu. Please say a
".
<n>
Connecting phone
command.
Pairing complete. Connection in
®
link. Enter yes.
Connection is complete. Phone <n> ready
command.
<n>.
Connection complete.
Using your Bluetooth
®
hands-free system 11