Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
b)
Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
off). Devices which cannot be switched on and off
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c)
Make sure the plug is disconnected from the socket
before
attempting any
adjustments, accessory
replacements or before putting the device aside.
Such precautions will reduce the risk of accidentally
activating the device.
d)
When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
e)
Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out by
qualified persons, only using original spare parts. This
will ensure safe use.
h)
To ensure the operational integrity of the device, do
not remove factory-fitted guards and do not loosen
any screws.
i)
When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
j)
Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
k)
Do not touch articulated parts or accessories unless
the device has been disconnected from the power
source.
l)
Do not move, adjust or rotate the device in the course
of work.
m)
Do not leave this appliance unattended while it is in
use.
n)
Clean the device regularly to prevent stubborn grime
from accumulating.
o)
The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
p)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
q)
Keep the device away from sources of fire and heat.
r)
Do not cover the ventilation openings!
s)
Use your tool at a lower input load than specified
on the nameplate to increase working efficiency and
decrease the wearing out process.
t)
Hold the machine firmly with both hands. When using
the machine, hold it by the handles provided with the
machine.
u)
The machine is not intended for overhead drilling.
v)
Check for the proper handle adjustment.
w)
The tool becomes very hot during operation.
x)
Safe operation depends on one's work posture.
y)
When working in an elevated location, pay attention
to objects and persons below.
12
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The diamond core drill is designed to drill pass-through and
not pass-through holes in mineral construction materials
such as concrete, all types of walls, asphalt, all types of
screed, natural stone, with the use of standard diamond
tipped core drills, wet drilling and using a stand.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
Model: MSW-DDM260, MSW-DDM300, MSW-DDM255G26
5
4
3
6
11
10
9
1
2
Model MSW-DDM205P24
5
6
4
3
7
8
2
9
1
10
Model MSW-DDM255G28
8
4
5
3
6
11
2
1
9
10
Rev. 06.10.2020
1.
Spindle
2.
Coolant valve
3.
Motor
4.
Motor carbon brushes cover
5.
On / off switch
6.
Lever for raising/ lowering the device
7.
Handle
8.
Guide rail
9.
Attachment screws
10.
Base
11.
Speed controller (not applicable to model MSW-
DDM260)
3.2. PREPARING FOR USE
3.2.1. APPLIANCE LOCATION
Ensure good ventilation in the room in which the device
is being used. Keep the product away from hot surfaces.
The device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out of
the reach of children and persons with limited mental and
sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to
the appliance must be properly grounded and correspond
to the technical details on the product label.
7
3.2.2. BEFORE FIRST USE
8
1.
Power source. Ensure that the power source which is
utilized conforms to the power requirements specified
on the product name.
2.
Power switch. Ensure that the power switch is in the
OFF position. If the plug is connected to a power
receptacle while the power switch is in the ON
position, serious accidents can occur.
3.
Extension cord. When the work area has no power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be kept
as short as possible.
4.
Make sure that the coolant is connected to the
machine through a 16 mm diameter tube. Lack of
water may cause damage to the device. The maximum
allowable liquid pressure is 0.12 MPa.
NOTE: Do not use contaminated water.
3.2.3. ASSEMBLY OF THE DEVICE'S ELEMENTS
MODEL: MSW-DDM260, MSW-DDM205P24, MSW-DDM300
•
Installing the raise / lower lever
Rev. 06.10.2020
•
Installing the handle
•
Rail alignment
•
Installation of strips protecting the device against tilting
•
Installing the top screw
Model: MSW-DDM255G28, MSW-DDM255G26
•
Installing the bracket (only applicable to MSW-
DDM255G28)
•
Installing the raise/lower lever
13
Publicité
Table des Matières
