Description - Hilti SIW 22T-A Mode D'emploi

Obligation signs
en
Wear eye
protection
Wear breathing
protection
Symbols
Read the
operating
instructions
before use
Rated speed
under no load
Location of identification data on the power tool
The type designation can be found on the type identification plate
and the serial number on the side of the motor housing. Make a
note of this data in your operating instructions and always refer to
it when making an enquiry to your Hilti representative or service
department.
Type:
Generation: 01
Serial no.:

2 Description

2.1 Use of the product as directed
The SIW 22T­A is a hand-held cordless impact wrench. It is suitable
for tightening and releasing nuts, bolts, anchors and wood screws.
Working on materials hazardous to the health (e.g. asbestos) is
not permissible.
Nationally applicable industrial safety regulations must be ob-
served.
Do not use the battery as a power source for other unspecified
appliances.
Modification of the power tool or tampering with its parts is not
permissible.
To avoid the risk of injury, use only genuine Hilti accessories and
insert tools.
The power tool should not be used for applications that require a
precise torque. For applications which require a precise torque or
where only a special limited torque is permitted, there is a risk of
over-tightening and damage to the screw or workpiece. For these
types of application, use a tool with a predefined torque setting to
prevent over-tightening.
Observe the information printed in the operating instructions
concerning operation, care and maintenance.
The power tool is designed for professional use and may be
operated, serviced and maintained only by trained, authorized
personnel.
hazards that may be encountered.
ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
The working environment may be as follows: construction site,
workshop, renovation, conversion or new construction.
2
Printed: 29.11.2013 | Doc-Nr: PUB / 5070699 / 000 / 03
Wear a hard hat
Return waste
material for
recycling.
Revolutions per
minute
This personnel must be informed of any special
Wear ear Wear protective
protection
Volts Direct current
The power tool and its
gloves