Description - Hilti HIT-ED 3500-A Mode D'emploi

Obligation signs
Wear eye Wear
protection. protective
gloves
en
Symbols
Read the Return waste
operating material for
instructions recycling.
before use.
Continuous Single stroke
operation

2. Description

2.1 Use of the product as directed
The ED 3500 A cordless dispenser is to be used exclusively with Hilti foil packs in 330ml or 500ml sizes. The
tool is designed to dispense the contents of Hilti foil packs in a controlled operation. The tool is equipped with
a holder for Hilti foil packs. Use of foil packs from a third party is not permissible.
The appliance is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
appliance and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
Never point the tool toward yourself or other persons.
Do not use the battery as a power source for other unspecified appliances.
Modification of the appliance or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti tools and accessories.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
Nationally applicable industrial safety regulations must be observed.
2.2 Additional items required for operating the tool
B 144/2.6 Li ion battery and C 4/36 or C 4/36 ACS charger
2.3 Li-ion battery charge status and overheating indicator
LEDs light constantly
LED 1,2,3,4
14
Printed: 07.07.2013 | Doc-Nr: PUB / 5069993 / 000 / 00
Wear
protective
clothing
"Off" position
LEDs blink
-
Location of identification data on the tool
The type designation and serial number can be found
on the type identification plate on the appliance. Make
a note of this data in your operating instructions and
always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
Charge status C
C 75 %