En - Annexe - User Manual Evolution 3E - MORIA EVOLUTION 3E Manuel Utilisateur

ANNEXE - USER MANUAL EVOLUTION 3E
WARNING AGAINST ELECTROMAGNETIC COMPATIBILITY (EMC)
The EVOLUTION 3E needs special precautions regarding EMC.
The EVOLUTION 3E has to be installed and put into service according to the EMC requirements.
The EVOLUTION 3E can be affected by portable and mobile RF communications.
WARNING AGAINST ELECTROSTATIC DISCHARGES (ESD)
Pins of connectors identified with the ESD warning symbol should not be touched and connections of these
connectors should not be made unless ESD precautionary procedures are used.
When a cable is connected to a connector identified with the ESD warning symbol, the EVOLUTION 3E
shall be switch off. Then, touch the main earth terminal or metal part which is connected the earth in order
to unload your body and connected the wished cable. Follow the starting procedure (refer to user manual
#65060).
All staff involved must receive an explanation of the ESD warning symbol and a training in ESD precautionary
procedure.
The training's content must include :
• the introduction of ESD warning
• a practical example of cable connection when ESD warning is present
• the insurance that the staff has completely understood the procedure and the risk if the staff
doesn't apply it.
WARNING AGAINST INTERFERENCE RISK
The use of accessories, transducers and cables other than those specified, with the exception of transducers
and cables sold by the manufacturer as replacement parts for internal components, may result in increased
emissions or decreased immunity EVOLUTION 3E.
The EVOLUTION 3E should not be used adjacent to or stacked with other equipment and that if adjacent
or stacked use is necessary, the EVOLUTION 3E should be observed to verify normal operation in the
configuration in which it will be used.
The use of the accessory, transducer or cable with EVOLUTION 3E other than those specified may result in
increased emissions or decreased immunity of the EVOLUTION 3E.
Guidance and manufacturer's declaration :
electromagnetic emissions
electromagnetic immunity
recommended separation distances
#65073 - B - 01.2017 MORIA
3