Cleaning And Maintenance; Replacing A Fuse - Skytec Helios DMX LED 4 Flower 192 Mode D'emploi

Cleaning and Maintenance:

The Helios LED flower requires almost no maintenance. However we recommend a frequent cleaning of the
device otherwise the light output will be reduced. Disconnect the mains power supply and wipe the cover with a
damp cloth. Do not immerse in liquid. Never use alcohol or solvents!
The objective lens will require weekly cleaning as smoke tends to building up residues, reducing the light output
very quickly.
There are no serviceable parts inside the Helios LED flower. Maintenance and service operations are only to be
carried out by authorized dealers

Replacing a fuse:

Unplug the unit from the main power source. Insert a flat-head screwdriver into a slot of the fuse cover (7).
Gently pry up the fuse cover, the fuse will come out. Remove the fuse and insert the replacement fuse into the
holder. Be sure to use a fuse of the same type and specification. Place the fuse cover back into the IEC socket
(7).
Specification:
Power: ................................................................................................ 230V / 50Hz ~
Power consumption: ........................................................................................... 20W
LEDs: ............................................................................... 96 Red, 48 Green, 48 Blue
DMX Channels:......................................................................................................... 3
Weight: ............................................................................................................... 4.5kg
Size (LxWxH): ..............................................................................335 x 535 x 185mm
Maximum ambient Temperature Ta:.................................................................... 45°C
Fuse: .....................................................................................................................F1A
•
Specifications and design are subject to change without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to
the unit. This would also invalid your warranty. The warranty is not applicable in case of accidents or
damages caused by inappropriate use or disrespect of the warnings contained in this manual. SkyTronic
cannot be held responsible for personal injuries caused by a disrespect of the safety recommendations and
warnings. This is also applicable to all damages in whatever form.
6