Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The "MRS-1000 Software" for the DMT-1000 has been
especially developed for evaluating measured variables that
are uploaded via the MODBUS interface (RS 485).
The main features of the software are:
• Simultaneous processing of up to 10 measured variables
that have been uploaded from selected transducers and
time and date stamped
• Provision for recording minima and maxima
• Continuous recording of up to 4 measured variables
(y/t plot)
• Digital display of up to 4 measured variables with provision
for switching to an analog display.
Fig. 15. Digital display.
• Adjustable measurement scanning interval
• Printing of measurements in tables or as curves
• Transfer of measurements to other Windows programs
• Simple setting of parameters
• Provision for saving measurements for subsequent
evaluation
• Provision for saving device configurations for reuse of
settings.
8. Notes of maintenance
No maintenance is required.
9. Releasing the transducer
Release the transducer from a top-hat rail as shown in
Fig. 18.
Ohio Semitronics, Inc.
12
7004-00090-A Rev 2/00
Fig.18
10. Dimensional drawings
15 16 17 18 19 20 21 22 23 2 2 2
1 2 3 4 5 6 7 8 9 11 13 14
87,5
Fig. 19. DMT-1000 in housing T24 clipped onto a top-hat rail
(35 x15 mm or 35 x7.5 mm, acc. to EN 50 022).
19
15 16 17 18 19 20 21 22 23 2 2 2
1 2 3 4 5 6 7 8 9 11 13 14
87.5
Fig. 20. DMT-1000 in housing T24 screw hole mounting brackets
pulled out.
Page 12 of 24
124
6.5
12
123.4
Publicité
Chapitres
Table des Matières
