Electrical System
2-wire, 1-phase
One-element
3-wire, 3-phase
Two-element
4-wire 3-phase
Three-element
Fig. 3.
6. Commissioning and Maintenance
Switch on the power supply and the measuring input. It is
possible during the operation to disconnect the output line and
to connect a test instrument, e.g. for a functional test.
No maintenance is required.
7. Releasing the Transducer
Release the transducer from a top-hat rail as shown in
Fig. 4.
7004-00068-A Rev --
Connection Diagram
Fig. 4.
8. Dimensional Drawing
112.5 mm
4.43 in.
114.1 mm
4.49 in.
Fig. 5. Housing P18/105 clipped onto a top-hat rail (35 x15 mm or
35x7.5 mm, according to EN 50 022)
Page 4 of 8
15
16
17 18 19 20
17 18
1
2
3
4
5
6
7
8
9
10
11
12
13
14
105 mm
4.134 in.
5/7/10