Powering On/Off Your Phone - ZTE Blade L2 Guide De Démarrage Rapide

Notes:
• If excessive discharge of the battery, the
charging icon will display delay.
• If the battery is extremely low, you may be
unable to power on the phone even when
it is being charged. In this case, try again
after charging the phone for at least 0
minutes. Contact customer service if you still
cannot power on the phone after prolonged
charging.
CAUTION: Do not change the built-in
rechargeable battery in your phone by yourself.
The battery can only be changed by ZTE or ZTE
authorised service provider.

Powering On/Off Your Phone

Make sure the battery is charged before
powering on.
• Press and hold the Power Key to turn on
your phone.
• To turn it off, press and hold the Power Key
to open the options menu. Touch Power off
> OK.
Waking Up Your Phone
. Press the Power Key to activate your screen
display.
2. Touch and hold
screen.
NOTE:
If you have set an 'unlock pattern', or a PIN/
password for your phone, you'll need to draw the
pattern or enter the PIN/password to unlock your
screen.
at the center of the