Powering On/Off Your Phone - ZTE BLADE S6 Guide Rapide

cause the battery to explode.
CAUTION:
Do not remove or change the built-in rechargeable
battery in your phone by yourself. The battery can only be
changed by ZTE or ZTE authorised service provider.
1. Connect the adapter to the charging jack. Ensure that
the adapter is inserted in the correct direction.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to
power on the phone even when it is being charged. In this
case, try again after charging the phone for at least 20
minutes. Contact the customer service if you still cannot
power on the phone after prolonged charging.

Powering On/Off Your Phone

Ensure that the battery is charged.
• Press and hold the Power Key to turn on your
phone.
• To turn it off, press and hold the Power Key to open
the options menu. Touch Power off and then touch
OK.
You can also press and hold the Power Key for about 10
seconds to turn off your phone.
Waking Up Your Phone
Your phone automatically goes into sleep mode when it
is not in use for some time. The display is turned off to
save power and the keys are locked to prevent accidental
operations.
You can wake up your phone by turning on the display
and unlocking the keys.
1. Press the Power Key to turn the screen on.
2. Swipe
NOTE:
If you have set an unlock pattern, a PIN or a password for
your phone, you'll need to draw the pattern, or enter the
PIN/password to unlock your phone.
up to unlock.
8