Cutting Hair - SilverCrest SHBS 500 D4 Mode D'emploi

Press the button on the back of the comb attachment 0/q and push the
♦
comb attachment 0/q upwards or downwards (see fig. 3). In this way,
you can set the desired cutting length (see also the section Cutting hair).
To remove the comb attachment 0/q, push it all the way
♦
upwards. The comb attachment 0/q detaches from the shaving
head 1 and can be removed.

Cutting hair

NOTE
► Only cut dry hair with the appliance.
► Depending on the cutting angle, the cutting length can vary slightly
from the setting on the comb attachment 0/q.
Make sure that the comb attachment 0/q sits firmly on the shav-
►
ing head 1 after adjustment.
1) Place a cloth around your neck and throat to stop hair trimmings from
falling down into your collar.
2) Comb the hair thoroughly (a comb r is supplied).
│
■ 14 GB│IE
1
2
Fig. 3
SHBS 500 D4