Inserting Zippers; Colocación De Vivos - Singer 5500 Manuel D'instruction

Masquer les pouces Voir aussi pour 5500:
Table des Matières

Publicité

INSERTING ZIPPERS

To sew down the right side, attach left side of
zipper foot to presser foot holder so that the
needle passes through the opening on the left
side of the foot.
To sew down the left side, attach right side of
foot to foot holder.
MISE EN PLACE DE FERMETURES À GLISSIÈRE
Pour coudre le côté droit, fixer le côté
g a u c h e d u p i e d f e r m e t u r e g l i s s i è r e a u
support du pied de façon à ce que l'aiguille
passe dans l'ouverture du côté gauche du pied.
Pour coudre le côté gauche, fixer le côté droit du pied au support du pied.
COLOCACIÓN DE CIERRES
Para coser el lado derecho, aplicar el lado izquierdo del prensatelas de cierres al sujetador pie
prensatelas, de manera que la aguja pase a través de la abertura en el lado izquierdo del prensatelas.
Para coser el lado izquierdo, aplicar el lado derecho del prensatelas al sujetador prensatelas.
PIPING
To pipe soft furnishings, cover cord with a bias
strip of fabric and pin or tack it to the main
piece of fabric.
Attach left side of zipper foot to foot holder so
that needle passes through the opening on the
left side of the foot.
Helpful Hint: Slight adjusting of the
needle position to sew closer to the
piping may be accomplished with the
Stitch Width Control.
GALONNER-BIAISER
Placez le cordonnet dans la bande de biais et épinglez ou faufillez-la sur le tissu.
Placez le pied fermeture glissière vers la gauche, de facon à ce que l'aiguille entre
dans l'encoche située du côté gauche du pied.
Suggestion utile: À l'aide de la commande de largeur de point, vous pouvez effectuer un
léger ajustement de la position de l'aiguille pour coudre plus près du biais.
COLOCACIÓN DE VIVOS
Para colocar vivos en articulos blandos, cubrir el cordón con una cinta de tejido al bies y sujetarla
con un alfiler o atacarla a la pieza principal de tejido.
Aplicar el lado izquierda del prensatelas de cremalleras al sujetador prensatelas, de manera que la
aguja pase a través de la abertura en el lado izquierda del prensatelas.
Consejo útil: Ajustar ligeramente la posición de la aguja para coser más cerca del vivo se
puede realizar mediante el control de ancho de puntada.
39

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

619961806160

Table des Matières