Getting The Most From Your Blueair System - Blueair ECO10 Guide D'utilisation

English
Getting the most from your
Blueair system
The Blueair system is easy to use. Make sure your unit is the right size for
your room, and change the fi lters according to recommended fi lter replace-
ment schedule. Remember that, just as air conditioners and heaters have
limits to the volume of air they can cool or heat, every air purifi cation system
has limits to the volume of air it can clean. Follow these common-sense
guidelines.
Close your windows
You wouldn't throw open your windows on a hot summer day and expect
your air conditioner to work effi ciently, because you can feel the hot air coming
in and the cool air going out. Even though you can't see the contaminated
air coming in and the clean air going out, the same logic applies to your air
purifi er.
Close your doors, too
Just as you might seal off part of your house on a cold winter night to keep
your heater working more effi ciently, seal off the room in which your system
is working for best results. This is especially important for people using a
Blueair system to ease nighttime asthma or allergy attacks.
Run your system 24 hours per day
For best results, run your Blueair unit 24 hours a day, 7 days a week.
Round-the-clock operation ensures that a continuous supply of clean,
fi ltered air constantly circulates throughout the room. Blueair systems are
designed for phenomenally low power usage. In fact, it costs about the
same to power a Blueair air purifi er as it does to power a single light bulb,
depending on the unit and the operating speed.
6 Blueair ECO10