HP Designjet T11 MFP Série Guide De Référence Rapide page 12

2.
Press the Media Profile button, and then press the Tool button
(Alternative path: Printer > Tool > Media Profile).
NOTE:
box as the first step. Calibrating the RIP involves configuring the gamma
values of red, green, and blue to ensure a neutral appearance of printed gray
(also referred to as gray balance). Press the Calibrate RIP button and follow
the on-screen instructions to use this feature.
3. Press the button that corresponds to the media that you have loaded in the
printer.
4. Press the OK button when this message appears.
8 Chapter 2 Basic Operations
With some printers, a Calibrate RIP feature is available in the dialog
.