Jydepejsen SENZA Manuel D'installation Et D'utilisation page 25

Masquer les pouces Voir aussi pour SENZA:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
UK
4. Close the door and let the glue harden for about 24 hours, before you open the door. If the glue is not hardened
enough, the sealing strip may fall out.
Replacement of sealing strip on the window
1. Remove the screws from the door.
2. Take out the window.
3. Remove the old strip.
4. Now, install a new sealing strip on the glass.
Re-install the window in reverse order.
Replacement of vermiculite plates
1. Remove the two 6mm flange bolts.
2. Remove holder for smoke turner plate and the smoke turner plate.
3. Lift the back plate and take it out.

Publicité

Table des Matières
loading

Table des Matières