Functions; Door Open Alarm - Whirlpool SW8 AM2C XR Directives D'utilisation

2. FUNCTIONS

2.1. ON/STAND BY
This function turns On/Stand-by the refrigerator. To put
the product in Stand-by, press & hold the On/Stand-by
button for 3 seconds. When the appliance is in
Stand-by, the light inside the refrigerator compartment
does not work. Remember that this operation does not
disconnect the appliance from the power supply. To
switch the appliance On again, simply press the On/
Stand-By button .
2.2. SMART DISPLAY*
This optional function can be used to save energy.
Please follow the instructions contained in the Quick
Start Guide to activate/deactivate the function. Two
seconds after activation of the Smart Display, the
display goes off. To adjust the temperature or use other
functions, it is necessary to activate the display by
pressing any button.
After activation of the Smart Display, the display goes
off, except the " Sense Fresh Control" /
indicator. If Smart Display is active - to adjust the
temperature or use other functions, it is necessary to
activate the display by pressing any button.
After about 15 seconds without performing any action,
the display goes off again and only the "
Control" / "ProFresh" indicator remains visible. When
function is deactivated the normal display is restored.
The Smart Display is automatically disabled after a
power failure. Remember that this function does not
disconnect the appliance from the power supply, but
only reduces the power consumed by external display.
Note: The declared appliance energy consumption
refers to operation with the Smart Display function
activated.
2.3. 6TH SENSE FRESH CONTROL
PROFRESH
This function allows optimum storage conditions
(regarding temperature and humidity) to be quickly
reached inside the appliance. The fan must also be
switched on for it to work properly. The "6th Sense
Fresh Control" / "ProFresh" is activated by default To
activate or deactivate this function – see enclosed
Quick Start Guide.
After a power blackout or exit from Stand-by to normal
mode, the "6th Sense Fresh Control" / "ProFresh" status
resets to default i.e. active.
*Available on selected models only. Please check on the QUICK START GUIDE if this function is actually available on your model.

2.4. DOOR OPEN ALARM

The Alarm icon
alarm sounds. The alarm is activated when the door
is left open for more than 2 minutes. To disengage the
door alarm close the door, or press once Stop Alarm
button
2.5. VACATION
This function can be activated to reduce the energy
consumption of the appliance during a period of
absence.
Before activating the feature, all perishable food should
be removed from the refrigeration compartment and
make sure that the door is closed properly, since the
refrigerator will maintain a suitable temperature to
prevent the formation of unpleasant odors (+12°C).
To activate/ deactivate press the Vacation mode button
for 3 seconds. When the function is enabled, the
related symbol will light up and the temperature of the
refrigerator compartment will be set to a higher setpoint
(the temperature display will show the new temperature
"ProFresh"
setpoint of +12°C).
Changing the temperature setpoint will automatically
deactivate the function.
Attention:
• Incompatibility with the "Fast Cool" function
To guarantee optimal performance, the "Vacation" and
Sense Fresh
"Fast Cool" functions cannot be used at the same time.
Therefore, if the "Fast Cool" function has been already
engaged, it has to be disengaged first to activate the
"Vacation" function (and vice-versa).
2.6. FAST COOL
The use of this function is recommended when
placing a very high quantity of food in the
refrigerator compartment.
Using Fast Cool
/
the cooling capacity in the refrigerator compartment.
To maximize the cooling capacity, please keep the fan
switch on.
Attention:
• Incompatibility with the "Vacation" function
To guarantee optimal performance, the "Vacation" and
"Fast Cool" functions cannot be used at the same time.
Therefore, if the "Vacation" function has been already
engaged, it has to be disengaged first to activate the
"Fast Cool" function (and vice-versa).
194
lights up blinking and the acoustic
to mute the acoustic alarm.
function it is possible to increase