Kinetec Spectra Manuel D'utilisation page 45

This function, The BY-PASS MODE is a way to address the pain threshold of a patient during a session.
Beginning
The unit is running
To select the BYPASS mode
To select the NEW pain level
To set the NEW pain level when reached, immediately
press
Continue the session with the new movement limits.
IMPORTANT: Can be used only when the machine RUN.
Keys to press
30
30
PYPASS: use + or -
30
Or
BYPASS: use + or -
30bypass
Continuous press
bypass.: use + or -
or
30manual
30
How to define the patient tolerance • During the session
Display
Kinetec
RUN 15 90
Check if the hand control is not blocked
Or
(See page 7).
WARMUP
RUN 15 90
The display indicates the keys used to run the
machine.
RUN 15 90
This message is displayed 3 seconds.
The unit is moving to the selected way.
100 90
It is waiting for you to select new limits.
The new limit of the movement is recorded.
50 50
WARMUP The angle display changes with current
movement.
run 45 50
Use of the hand control
Remarks
GB
17