SOLIS BREEZE 360 Mode D'emploi page 37

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

THE FUNCT ION BU T T O N S
O N YO UR AP P LIA NCE
;
O N / OF F b ut t o n
Once you connect the power plug to the power outlet, a double signal sound can
be heard, indicating that the appliance is in standby mode. In standby mode, the
appliance can only be activated with the ON / OFF button, all the other buttons are
;
deactivated. If you press the
button, the display lights up in the standard settings
and the fan starts up.
Sp e ed b u tt o n
You can select one of three speed settings by pressing the speed button: low, me-
dium and high. The high speed is followed by the low speed and then the sequence
starts over. The corresponding LED lights up in the display.
low
medium
high
72
8
Oscillation angle
+ timer (operation
time)
Oscillation
activated
Operation mode
Fan speed
Di rec ti o n b u tt on s
The centre of the selected oscillation angle can be set with the buttons
As long as you press the buttons
or
the right. As soon as you release the button, the fan oscillates within the selected
angle with the centre of the angle located where the direction button was released.
Note: The centre of the oscillation angle can be set by hand to an angle
between 0° and 360°.
The vertical inclination can be set by hand to the following angles:
-8°, 0°, 10°, 20°, 30°, 40°, 50°, 60°, 70°, 80°, 90°.
If the angle is set to 90°, the fan head is completely horizontal, the air circulates
upward without generating unpleasant, direct air draughts.
Horizontal orientation:
electric or manual setting
possible
Osc ill a ti on b u tt on
Your fan can permanently swivel from the left to the right. At what angle this should
happen has to be previously set by you.
The automatic, horizontal oscillation can be set to the following angles with the
oscillation button
: 0 (no lines on the display, the oscillation stops) – 60° – 90° –
180° – 360° – 0 (oscillation stops). By each press of the
to the next angle. The setting can be read off the display by the beam shaped lines.
8
Oscillation at a 60° angle
Oscillation at a 180° angle
8
, the fan head moves either to the left or
Vertical orientation:
only manual setting
button, the setting jumps
8
Oscillation at a 90° angle
360° rotation
8
.
73

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7582

Table des Matières